Statistics Processes Control MCQ In Mechanical Engineering Subject
Q. 1
In a double sampling plan if the 1st sample is neither good enough nor bad enough then the decision on acceptance or rejection is based on the evidence of --------
a) Last two combined
b) First & last combined
c) First & second sample combined✅
d) First three combined
Q. 2
The items are subjected to ---------- test must be inspected by sampling inspection
answer choices
a) Quality
b) Destructive✅
c) Production
d) Single
Q. 3
In double sampling plan second sample is taken when the number of defective --
answer choices
A) Exceeds C1 but doesn’t exceeds C2
b) Doesn’t exceeds C1
c) Exceeds C2✅
d) Exceeds both C1& C2
Q. 4
In double sampling
plan, second sample is taken when the number of defectives -------
answer choices
a) > C1 but < C2
b) > C1
c) > C1 and C2
d) < C2✅
Q. 5
The method of accepting
or rejecting the lot is known as -------
answer choices
a) Lot
sampling
b) Acceptance sampling✅
c) Batch sampling
d) Quality
control
Q. 6
The number of items in a lot is called as -------
answer choices
a) Test quantity
b) Sample size
c) Batch size
d) Lot size✅
Q. 7
When a decision on
acceptance or rejection is made on the basis of single sample drawn from a
lot, the acceptance plan is called as -------
answer choices
a) One time
sampling plan
b) Lot tolerance✅
percent defective
c) Lot tolerance
percent defective
d) Both B & C
Q. 8
The maximum number of
allowable defective in a lot is called as --------
answer choices
a) Lot number
b) OK number
c) Rejection number
d) Acceptance number✅
Q. 9
------- is the process of evaluating a portion of the product in a lot for the purpose of accepting or rejecting the lot on the basis of conforming or non-conforming to the quality specifications.
answer choices
a) Acceptance sampling✅
b) Batch sampling
c) Quality checking
d) Lot sampling
Q. 10
The success of sampling inspection depends upon --------
answer choices
a) Lot size
b) Sample size
c) Acceptance number
d) All✅
Q. 11
In a sampling plan
n=500, n1=10, n2=8, C1=1, , if the number of defectives in the 1st
sample are 3, then the decision will be -------
answer choices
a) No
rejection
b) Take a second sample
& inspect
c) Go with production
d) Lot OK✅
Q.12
In double sampling plan ‘C2’ is the acceptance number for the -------
answer choices
a) First & last combined
b) First & second combined✅
c) Last two combined
d) First three combined
Q. 13
In any sampling plan if ‘C’ is the acceptance number then the rejection number is -------
answer choices
a) C✅
b) C-1
c) C+2
d) C+1
Q.14
The number of items in
a sample is called as -------
answer choices
a) Lot size
b) Batch size
c) Test quality
d) Sample size✅
Q.15
The larger the sample size & acceptance number ------- is the slope of OC curve
answer choices
a) Straight
b) Curve
c) Steeper✅
d) Horizontal
Q. 16
LTPD stands for ----------
answer choices
a) Lot Tolerance Perfect Defective
b) Lot Tolerance Percent Defective
c) Lot Tolerable Percent Defective✅
d) Lot Tolerance Piece Defective
Q. 17
The probability of rejecting a good lot which otherwise would have been accepted is called as …………….
answer choices
a) Rework
b) Consumer’s risk
c) Producer’s risk✅
d) OK good
Total Quality Management MCQ In Mechanical Engineering Subject
Q. 1
For identification of vital few for the given data, the tool used is----------
answer choices
a) Cause-Effect diagram
b) Scatter diagram
c) Pareto Analysis✅
d) Check Sheet
Q.2
------- is the predetermination of future achievements in type of product, volume of production, quality, time, price in manufacture & resources required.
answer choices
a) Prior planning
b) PPC✅
c) Production planning
d) Planning
Q. 3
‘Quality of product’ produced in the organisation is the responsibility of ------
answer choices
a) Production
department
b) Quality Control
c) Design department✅
D) All departments
Q. 4
The cost of performance testing of the product comes under -------
answer choices
a) Prevention cost
b) Appraisal cost✅
c) Interval failure cost
d) External failure cost
Q. 5
Total quality
management (TQM) mainly aims for -------
answer choices
a) Control for quality✅
b) Usefulness of product
c) Customer satisfaction
d) Cost control
Q. 6
For knowing the frequency of variable value in the given data, the useful tool is -------
answer choices
a) Control chart✅
b) Check sheet
c) Structured questionnaires
d) Cause-effect diagram
Q. 7
For drawing the run chart the data used is -------
answer choices
a) Past data of variable✅
b) Past data of attributes
c) Past & present data of variable
d) Present data of attributes
Q. 8
The statistician who invented the control chart for use in
industrial quality
control was:
answer choices
A) Deming
B) Taguchi
C) Pareto
D) Shewhart✅
Q.9
The chart which aggregates poor quality outcomes to show management which are the most important problems is the:
answer choices
A) s chart
B) Pareto chart✅
C) R chart
D) x-bar chart
Q. 10
One of Deming's main theories on quality control and management involves:
answer choices
A) TQM✅
B)Taguchi methods
C)Pareto diagrams
D)control charts
Q. 11
Study methods can be
improved by -----------
answer choices
a) Benchmarking✅
b)Improved note taking
c) Vacations
d) Sitting in the front
row
Q. 12
ISO 9002 requires --------
answer choices
a) Constantly holding meetings with customers
b) Frequent vendor visits
c) Getting production and inspection/installation methods certified✅
d) Getting final inspection methods shipshape
Q. 13
Cause-effect diagram is used in --------
answer choices
a) Problem identification
b) Field visits
c) Vendor surveys
d) Problem analysis✅
Q. 14
In our country -------- is the ‘National Standards Body’?
answer choices
a) NSB
b) BIS✅
c) NBS
d) ISB
Q. 15
------- standards
gives guidelines for selection & use of appropriate model.
answer choices
a) ISO : 9000✅
B) ISO : 9001
C) ISO : 14000
D) ISO : 9002
Q.16
ISO:9000 series of standards are useful to -------
answer choices
a) Only for SSI units
b) Only MSME units
c) Only for a service organization
d) All type of industries✅
Q. 17
ISO:9000 series of quality standards was formulated by -------
answer choices
a) International standard of organisation
b) Organization of international standard
c) International organisation for standardisation✅
d) Indian standard organisation
Q. 18
The ISO:9000 certificate awarded is normally valid for ------- years.
answer choices
a) 1 year
b) 2 year
c) 3 year✅
d) 5 year
Introduction to Quality MCQ In Mechanical Engineering Subject
Q.1
A physical or chemical property or any other requirements used to define the nature of the product is termed as ---------
answer choices
a) Quality properties
b) Material properties✅
c) Quality characteristics
d) Quality specifications
Q. 2
Quality is defined as the …………. for use.
answer choices
a) Fitness✅
b) Standard
c) Requirement
d) Availability
Q. 3
The basic objective of quality control in any organisation is to ----------
answer choices
a) Quality development, quality maintenance and quality improvement activities in organisation
b) Achieve optimum cost
c) Achieve customer’s satisfaction
d) Achieve all the above✅
Q4.
The quality of design is concerned with the ---------- for the manufacture of the product.
answer choices
a) Exactness of specification
b) Fitness of specification
c) Correctness of specification
d) Tightness of specification✅
Q. 5
The quality depends upon ------- of a person in a given situation.
answer choices
a) Vision
b) Perspective
c) Standard of Situation✅
d) Thinking
Ye Bhi Padhe :-Mechanical Engineering CAD/CAM/CAE Subject All Chapter MCQ
Q. 6
Cost associated with defective products being shipped to the customers are called as -----
answer choices
a) Cost of internal failure✅
b) Total cost of failure
c) Rejection cost
d) Cost of external failure
Q. 7
The cost associated with measuring, evaluating or auditing the product come under ------
answer choices
a) Cost of appraisal✅
b) Cost of prevention
c) Correctness of specification
d) Cost of external failure
Q. 8
To ensure the quality one has to ------- the quality.
answer choices
a) Confirm
b) Control
c) achieve
d) Ensure✅
Q. 9
The quality of product means -------
answer choices
a) Degree of brightness
b) Fitness for use✅
c) Fitness for use at minimum cost
d) degree of perfection at any cost
Q. 10
------- is the variation in specification for the same function & use.
answer choices
a) Deviation✅
b) Grade
c) Difference
d) Fluctuation
Leading & Controlling MCQ In Mechanical Engineering Subject
Q.1
------- leaders uses his or her power very little, if at all, giving subordinates a high degree of independence in their operations.
answer choices
a) Autocratic✅
b) Democratic
c) The free rein
d) Ideal
Q. 2
In second group, Herzberg listed certain -------- they include achievement, recognition, challenging work & growth in the job.
answer choices
a) Dis-satisfiers
b) satisfiers✅
c) Motivators
d) De-motivators
Q. 3
-------- refers to an individual’s subjective judgement about the Fairless of reward she or he got, relative to the inputs, in comparison with reward of other
answer choices
a) Equity theory✅
b) Maslow’s theory
c) X & Y theory
d) All theories
Q.4
Budget control is the used mainly to control --------
answer choices
a) Delivery data✅
b) Physical resources
c) Cost of product
d) Quality of product
Q. 5
Which motivational theory considers mainly the ‘Hierarchy of needs’?
answer choices
a) ‘X’ theory
b) ‘Y’ theory
c) Maslow theory✅
d) Taylor theory
Q. 6
Self esteem, status affiliation
with others, affection those come under ------- needs.
answer choices
a) Basic
b) Primary
c) Third level of
d) Secondary✅
Q.7
Which type of leader gives high degree of freedom to his/her subordinates?
answer choices
a) Autocratic
b) Democratic
c) Free-rein✅
d) Business
Q. 8
Under theory ------ average human being learn, under proper conditions, not only to accept responsibility but also to seek it.
answer choices
a) Y✅
b) X
c) W
d) Z
Q.9
Vroom theory may be stated as ---------
answer choices
a) Valance= Force x Expectancy
b) Force= Valance x Expectancy✅
c) Result= Balance x Expectancy
d) Expectancy= Valance x Force
Q. 10
Theory -------- is pessimistic, static & rigid.
answer choices
a) Y
b) X✅
c) Maslow’s
d) Z
Q. 11
At the --------, the conceptual & design abilities & human skills are especially valuable
a) Middle management level
b) Top management level✅
c) Lower management level
d) All above
Q. 12
---------- is ability of individual or group to induce or influence the beliefs or action of other person or group.
answer choices
a) Power✅
b) Authority
c) Post
d) Leadership
Q.13
If -------, then this could results in an autocratic behaviour of superior who is not held accountable for his or her action.
answer choices
a) Power is less than responsibility
b) Power is greater than responsibility✅
c) Power is equal to responsibility
d) Power is proportional to responsibility
Q.14
Controlling function finds out how far __________ deviates from standards.
answer choices
(a) Actual performance✅
(b) Improvement
(c) Corrective actions
(d) Cost
Q. 15
Which of the following is not a limitation of controlling?
answer choices
(a) Little control on external factors
(b) Costly affair
(c) Ensuring order & discipline✅
(d) Difficulty in setting quantitative standards
Q. 16
Assembling of facilities and personnel for collecting, processing, information that is required by managers is called
answer choices
(a) PERT
(b) CPM
(c) Ratio analysis
(d) Management information Technique✅
Q.17
Remedial actions taken to prevent deviation in future is called
answer choices
(a) Measurement of actual performance
(b) Taking corrective actions✅
(c) Analyzing deviations
(d) Setting performance standards
Q. 18
Which of the following is a traditional technique of managerial control?
answer choices
(a) Personal observation
(b) Breakeven analysis
(c) Budgetary control
(d) All of the above✅
Q.19
Which of the following is not a process of controlling?
answer choices
(a) Analyzing deviations
(b) Integrates employees efforts✅
(c) Taking corrective measures
(d) Setting performance standards
Q. 20
“Planning is theoretical whereas controlling is practical”
answer choices
(a) True✅
(b) False
(c) Cannot say
CADCAMCAE Test Series
1. Compared to humans, machines:
answer choices
a) can make more complex decisions based on unexpected circumstances
b) can work in harsher environments
c) make fewer errors
(a) and (c)✅
2. Most industrial control applications
answer choices
can be solved using more than one method of control
can be done more reliably using solid-state methods
must have the process specified correctly to be successful
All of the above✅
3. FEA means
answer choices
Four Effect Analysis
Finite Element Analysis✅
none of these
4. Post processing consist of,
answer choices
Building geometry
check the results✅
define material properties
assign boundary conditions
5. Solution phase
consist of,
answer choices
Building
geometry
check the results
solver✅
displacing results automatically
6. In thermal analysis
problems the primary field variable is,
answer choices
temperature✅
heat flux
displacement
none
7. In Simple elements
nodes are ,
answer choices
located at the comers of elements✅
located at
middle of elements
located at internal
none of above
8. If the accuracy of the mesh is improved using a
higher order polynomial then it is called,
answer choices
h refinement
P refinement✅
hp refinement
r refinement
9. The term finite element was
introduced by,
answer choices
Hrenikoff
Courant
Clough✅
Zienkiwicz
10. If mesh density increases,
answer choices
Accuracy of results increases✅
Accuracy of results decreases
Accuracy remains usual
All of the above
11. The element
equations cannot be solved without,
answer choices
Boundary conditions✅
Linear static
conditions
Post processing
conditions
None
12. Discretization can be done
using software mostly in industry,
answer choices
Hypermesh✅
Autocad
Fluent
Catia
13. Term AE/L
represents
answer choices
Stress
Strain
stiffness✅
Stiffness matrix
14. Stress analysis of
spur gear can be conveniently done using software,
answer choices
Ansys✅
Pro-E
AutoCad
Catia
15. If the no. of nodes
increases,
answer choices
Accuracy✅
decreases
Accuracy increases
Accuracy remains
same
none
16. The process of
building the structure matrix [K] from the element stiffness matrices
[K]e is called,
answer choices
assembly✅
decomposition
interpolation
extrapolation
17. In Simple elements
nodes are ,
answer choices
located at the comers of elements✅
located at middle of elements
located at internal
none of above
18. Which of the following statements is true in case of flexible automation?
answer choices
It reduces lead time in design
It uses ordinary GPMs
It reduces lead time in mfg. and offers inclusion of variety of products✅
All of these
19. . A flexible manufacturing system may contain __________
answer choices
Automated m/c tool
Automated material handling system
Computer interface
All of these✅
20. ROBOT is example of
answer choices
Programmable automation✅
Flexible automation
Fixed automation
All above
21. Which of the following is a parts classification and codification system in group technology?
answer choices
CODE
MICLASS
OPITZ✅
All of these
22. Purchasing of raw material, Tools, Jix and fixture will be done in ___________activity.
answer choices
CAD
MRP✅
CAE
None of these
23. Flexible Manufacturing System (FMS) represents
answer choices
Group of part family
Arrangement of all automatic machines
Conventional machining
None of these✅
24. Which of the following is the rapid prototyping method ?
answer choices
Stereo lithography
Selective Laser Sintering
Fused Deposition Modeling
All of these✅
25. Retrieval type’ and ‘generative type’ are the types of
answer choices
CAPP✅
GT
FMS
CNC programming
26. CIM necessitates ________________
answer choices
Unique Architecture for all mfg. firms
Unique Architecture for all mfg. and service industries
Preferably customized architecture for diff. mfg. setups✅
None of these
27. More job variety can be well accommodated in case of
answer choices
Rigid automation
Flexible automation✅
Continuous flow process
None of these
28. CIM comprise of
answer choices
Only CAM
CAD and CAM
CAD/CAM and other business functions✅
CAD, CAM and CAE
29. CAPP involves use of computer in _________
answer choices
Planning the processes✅
Determine cutting conditions
Setting time standards
All of these
30. In group technology, on part family is on collection of parts based on _______
answer choices
Shape
Size
Similar processing steps
Any of these✅
Ye Bhi Padhe :- Mechanical Engineering CAD/CAM/CAE Subject All Chapter MCQ